The biomass pellets produced by the principle of biomass granulator are smooth, dense and crack-free, which is a suitable product, but the combustion is not sufficient. What's
Jun 27, 2022
After heating and igniting the preheating and drying stages, under the action of radiant heat flow, when the temperature reaches about 100°C, the water between the fuel surface and
Usually, when we use the wood pellet machine, the lubrication system inside the equipment is an indispensable part of the entire production line. If there is a lack of lubricating
The feed extruder affects the product in the finished material of the equipment The feed extruder can prevent non-finished materials from entering the fuel injection section and wa
Nov 17, 2021
Under the condition that the extruder guarantees a reasonable compression ratio, the ring die is too thin and the strength of the ring die is not enough. The phenomenon of mold exp
Nov 16, 2021
First, the bearings of the expanded case body should be filled with lubricating grease in time. After 500 hours of operation, all the lubricating grease should be replaced once. (A
Nov 15, 2021
1. The main shaft of the extruder is a combined structure, and the spare extension shaft can adapt to the extruded processing of different raw materials. The model design is novel,
1. Check whether the system is in good condition before driving, and keep the oil cylinder, piston, and pressure gauge pipeline valves. 1. Before starting the machine, check whethe
Nov 14, 2021
1. The mixer does not load: (1) The equipment that has not been used for a long time does not load, mainly due to the poor exhaust caused by dust accumulation in the exhaust bag. I
Nov 13, 2021
1. The feed mixer should be installed on a stable and firm ground with a support frame, and pay attention to adjusting the height of the feed channel and the discharge channel. 2.
Nov 12, 2021
1. The influence of raw materials on the mixing effect In feed processing, generally speaking, the feed mixer uses more than 3 in the process of feed composition. The smaller the d
Nov 11, 2021
Advantages of horizontal feed mixer: Horizontal feed mixers are very likely to be used in feed processing, because this feed mixing equipment has many advantages such as high mixin
Nov 10, 2021
