Hot Products

Table of contents   1.Feed pellet machine 2.Feed extruder machine 3.Food machinery and equipment 4.Carbon Rod Machine 5.Wood chipper 6.Agricultural machinery

 

 

 

 

 

Feed pellet mill, is a kind of high efficiency, large capacity, low energy consumption, environmentally friendly equipment, which is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms.

Diesel pellet mill and motor pellet mill difference

 

First, the driving method is different

Diesel pellet mills are driven by the power of a diesel engine, whereas motor pellet mills, which are commonly used in general, are driven by the power of an electric motor. This means that the diesel pellet mill can be used outdoors where there is no power supply, while the motorized pellet mill needs a power supply to work.

Cutting speed and efficiency are different

Since the diesel engine is more powerful, the cutting speed and efficiency of a diesel pellet mill is faster than that of a motorized pellet mill. At the same time, the diesel pellet mill can also be adjusted according to the different working conditions of the rotational speed, improve efficiency. However, it is also because of its stronger power, diesel pellet mill noise and fuel consumption than motor pellet mill to be higher.

Third, the use of different environments

Because of the higher noise and fuel consumption of diesel pellet mill, it is more suitable for outdoor occasions and places without power supply. The motor pellet mill can be used in indoor environment, and because of its noise and low fuel consumption, it is more suitable to be used in places with higher requirements on noise and fuel consumption.

 

Model	Capacity	Power	Weight	Dimension
BH-125	80-100(KG/HR)	3(KW)	95(KG)	110*35*70(CM)
BH-150	90-150(KG/HR)	4(KW)	100(KG)	115*35*80(CM)
BH-210	200-300(KG/HR)	7.5(KW)	200(KG)	115*45*95(CM)
BH-230	250-350(KG/HR)	11(KW)	250(KG)	138*46*100(CM)
BH-260	400-500(KG/HR)	15(KW)	320(KG)	130*53*105(CM)
BH-300	600-800(KG/HR)	22(KW)	415(KG)	145*62*120(CM)
BH-360	900-1000(KG/HR)	22(KW)	600(KG)	160*67*145(CM)
BH-400	1200-1500(KG/HR)	30(KW)	800(KG)	160*67*145(CM)
BH-500	1500-1600(KG/HR)	45(KW)	1000(KG)	196*88*150(CM)

 

 

 

Model	Formulated Power	Capacity	Weight	Package size
BH-120A	8(HP)	60-100(KG/H)	140/165(KG)	900*500*730(MM)
BH-150A	8(HP)	90-120(KG/H)	165/190(KG)	1000*500*750(MM)
BH-200A	15(HP)	200-300(KG/H)	330/420(KG)	1460*750*900(MM)
BH-230A	22(HP)	300-400(KG/H)	420/450(KG)	1560*850*1000(MM)
BH-260A	33(HP)	400-600(KG/H)	470/510(KG)	1200*500*1070(MM)
BH-300A	41(HP)	600-800(KG/H)	850/890(KG)	1220*600*1100(MM)
BH-400A	55(HP)	800-1000(KG/H)	980/1030(KG)	2300*850*1300(MM)

 

 

Model	Capacity	Power	specification	Weight	Size
GHDB470	0.7-1t/h	75kw	4-12mm	3.8t	2300*1100*2050mm
GHDB560	1-1.5t/h	90kw	4-12mm	6.1t	2350*1230*2300mm
GHDB600	2-2.5t/h	110kw	4-12mm	6.5t	2350*1280*2300mm
GHDB680	2.8t/h	132kw	4-12mm	7.3t	2900*1300*2400mm
GHDB700	3.2t/h	160kw	4-12mm	8.5t	2900*1450*2500mm
GHDB580	1.5-2t/h	110+2.2kw	4-12mm	5.5t	2300*1350*1950mm
GHDB700	2-2.5t/h	160+2.2kw	4-12mm	6.5t	2400*1400*2000mm
GHDB850	3.0-4t/h	250+2.2kw	4-12mm	7t	2500*1550*2350mm

 

The flat die pellet machine has a slow speed and low temperature, and is suitable for raw materials with low viscosity, such as fermented feed. It has a low pellet breakage rate and is suitable for scenarios with high requirements for pellet hardness. The flat die pellet machine has a relatively low output, but it is easy to operate and suitable for small farms or home use.

The ring die pellet machine has a fast speed, high temperature, and large output, and is suitable for feeds with high requirements for pellet maturity. It is suitable for large-scale production, especially in feed mills. The production cost of the ring die pellet machine is high, but it consumes less electricity and is suitable for environments with high production requirements.

In terms of price, the flat die pellet machine is usually lower in price, while the ring die pellet machine is higher in price. Therefore, the choice of which pellet machine depends on the budget and production needs.

 

 

 

 

 

 

Our equipment has LX series and DGP series, the main difference is the different models, LX series of equipment, the electronic control cabinet is set in the equipment, the operation is more convenient, DGP series of equipment, the electronic control cabinet is independent of the equipment next to the LX model is more high-end, the DGP model is more affordable. So you can choose according to their actual needs.

LX-Feed Extruder Machine prices range from 1500-3500$.

The price of DGP-Feed Extruder Machine is between 1100-15000$.

Prices are affected by many factors, please contact us.

At the same time, we have wet single-screw extruder, wet twin-screw extruder, dry single-screw extruder, dry twin-screw extruder.Comparing these models, the price of single-screw extruder will be lower, but the twin-screw is more stable than single-screw extruder.According to the number of shaft of the puffer is one, two, divided into single-screw puffer, twin-screw puffer. Twin-screw extruder has a wide range of raw materials, low maintenance costs, energy-saving features, if the production of molding Good, beautiful appearance, the degree of uniformity of maturity with the feed, such as: aquatic material, pet food, tissue protein, etc., but also a variety of raw materials can be expanded: corn, soybeans, etc. and ordinary livestock and poultry feed, you can consider choosing a twin-screw extruder. If it is a small-scale farmers to deal with a variety of raw materials such as: corn, soybeans, etc. and ordinary livestock and poultry feed, choose a single-screw extruder can be.

It is wrong to think that adding water in the expansion process is wet expansion and not adding water is dry expansion. Wet puffing machine is in the dry puffing machine on the basis of an increase in the tempering device, its purpose is: to enhance the material temperature, soften and to cook the material, supplemented by a certain amount of water. Wet puffing than dry puffing high efficiency and spiral, puffing chamber wearing parts of long service life, the reason is: if the material puffing temperature of 130 ℃, dry puffing from room temperature (20 ℃) to 130 ℃ need to heat 110 ℃; if the wet production, tempering temperature of 80 ℃, only need to raise the temperature of the material of 50 ℃, so the wet puffing mechanical energy required less than dry puffing, more energy can be used to improve production; because the material is softened and cooked material, supplemented with a certain amount of water. Energy can be used to improve the output; due to the softening of the material, reduce the wear and tear of the spiral, expansion chamber and other wear parts, improve its service life.

 

Model	LX45	LX65	LX75	LX85
Power	5.5KW	15KW	18.5KW	22KW
Yield	140-160	200-240	260-320	450-550
Weight	350KG	500KG	550KG	750KG
Capacity	50KG/H	150KG/H	200-300KG/H	400-500KG/H
Size(mm)	1800*810*1080	1700*970*1240	1700*970*1240	1850*1070*1400

 

 

Model	Power	Feeder	Cutter	Capacity	Dimension	Weight
DGP40	4KW	0.4KW	0.4KW	0.04-0.05T/H	1400*1030*1200MM	240KG
DGP50	11KW	0.4KW	0.4KW	0.06-0.08T/H	1400*1030*1200MM	320KG
DGP60	15KW	0.4KW	0.4KW	0.12-0.15T/H	1450*950*1430MM	480KG
DGP70	18.5KW	0.4KW	0.4KW	0.18-0.25T/H	1600*1400*1450MM	600KG
DGP80	22KW	0.4KW	0.75KW	0.3-0.35T/H	1850*1470*1500MM	800KG
DGP90	30KW	1.1KW	1.5KW	0.4-0.45T/H	1900*1500*1600MM	1200KG
DGP100	37KW	1.1KW	1.5KW	0.45-0.5T/H	2000*1600*1600MM	1500KG
DGP120	55KW	1.1KW	2.2KW	0.5-0.7T/H	2200*2010*1700MM	1850KG
DGP135	75KW	1.1KW	2.2KW	0.8-1.0T/H	2600*2200*1850MM	2500KG
DGP160	90KW	1.5KW	2.2KW	1.2-1.5T/H	2800*2400*1850MM	2800KG
DGP200	132KW	3KW	3KW	1.8-2.0T/H	3450*2500*1950MM	3000KG

 

 

Model	Capacity	Power	Screw diameter	Weight
75-B	0.3-0.4 T/H	22 KW	80 MM	1000 KG
85-B	0.5-0.6 T/H	30 KW	90 MM	2000 KG
90-B	0.6-0.7 T/H	37 KW	100 MM	2100 KG
100-B	0.7-0.8 T/H	55 KW	120 MM	2200 KG
135-B	1-1.5 T/H	75 KW	135 MM	3200 KG
145-B	2-3 T/H	90 KW	145 MM	4000 KG
160-B	3-4 T/H	110 KW	160 MM	4500 KG
175-B	4-5 T/H	132 KW	175 MM	5000 KG

 

 

Model	Capacity	Power	Conditioner	Weight
65	0.3 T/H	22 KW	3.0 KW	0.75 KW
70	0.5 T/H	37 KW	3.0 KW	1.1 KW
80	0.8 T/H	55 KW	5.5 KW	1.5 KW
85	1.0 T/H	75 KW	7.5 KW	2.2 KW
90	1.5 T/H	90 KW	11 KW	3.0 KW
120	2.0 T/H	110 KW	15 KW	3.0 KW

 

 

 

3.(1)Vegetable dicer

High-speed dicing machine is suitable for food processing plants, catering industry, canteens, and the whole machine is made of 304 stainless steel.

1. The knife disc is easy to clean and replace, and the operation is simple.

2. The cutting speed can be adjusted through the electric control panel. Mainly used for dicing and cutting root vegetables and fruits.

Root vegetables: potatoes, radishes, sweet potatoes, eggplants, onions, taro, ginger, pumpkin, winter melon, etc. and apples, yellow peaches, peaches, cantaloupes, dragon fruits, kiwis and other fruits and vegetables are cut into dices. The cutting size can be customized according to needs. It is suitable for fruit and vegetable processing plants, central kitchens, catering chain distribution centers, and large canteens.

● There is a micro switch at the feeding point for safe operation;

● It can be cut into strips (wires) through simple modification;

● The dicing speed is fast, which can match the workload of 35-40 people in the same time.

● Three-dimensional cutting principle, smooth and flat cut surface.

● It does not destroy the material organization and does not affect the taste.

 

Model	Power(kW)	Cut Size(mm)	Dimensions(mm)	Capacity(kg/h)	Weight(kg)
MK500	1.5	5/8/10/12/15/20/25	1750*1250*1600	800-3000	282
MK1500	1.5	5/6/8/10/12/15/20	1370*1070*1250	2000-3000	300
MK800	0.75	4/5/3/7/1	900*710*1260	300-1000	102

 

 

3.(2)Meat cutting machine

This machine is suitable for chicken and duck, small and medium-sized animal bones, spareribs, frozen meat, fresh meat, frozen chicken, chicken legs and other processing equipment, according to the needs of cutting pieces, sections, strips, shape and size can be adjusted.

This machine is cost-effective, saving labor, one machine can work for more than 500 kg per hour, greatly improving production efficiency, widely used in large and medium-sized food processing plants, collective canteens, slaughterhouses, meat processing plants, supermarkets, restaurants, etc.

 

 

Model	CM-600
Voltage	220V
Power (kw)	2.2kw / 3kw
Capacity (kg/h)	600 kg/h
Dimension(cm)	130*70*85 cm
Weight (kg)	260 kg
Cutting cube size(mm)	20*50mm

 

3.(3)Food extruder machine

These snacks can be made from a variety of grains such as corn, wheat, rice,oats, and potatoes, and are available in various shapes and flavors. One of the most popular puff snack food is corn puffs.

Corn puff extruder machines are essential equipment for making corn puff snacks. These extruders use the process of extrusion to transform corn meal into corn puff snacks. The extrusion process produces puffed snacks that are crispy and crunchy, and have a unique texture and flavor.

 

Model	Capacity	Power	Weight	Dimension
MK-40	40-50KG/H	5.5KW	310KG	1300*1200*1100MM
MK-50	80-100KG/H	7.5KW	330KG	1350*1100*1200MM
MK-60	120-150KG/H	15KW	360KG	1350*110*1200MM
MK-90	400-500KG/H	30KW	800KG	1650*1450*1300MM

 

3.(4)Peanut butter machine

Working Principle :

The basic principle of colloid mill machine is that the fluid or semi-fluid material is subjected to strong shear force, friction force and high-frequency vibration through the fixed and moving teeth which are relatively connected at high speed. Grinding on mill tooth profile incline relative motion but becomes, one of the high speed rotating, another still make material through between tooth bevel material by shear force and friction force, at the same time in the high frequency vibration and the high speed whirlpool, etc under the action of complex force effectively shatter, emulsion, homogeneous, temperature, to obtain satisfactory fine processing of the products.

 

Scope of application:

(1) Various nuts: such as Peanuts, Sesame, Almonds, Cocoa, Cashew, Soya beans, Corn, Hazelnut , Pistachios, Macadamia nuts, etc.

(2) Vegetables and fruits: Chili, Garlic, Ginger, Onion, Tomato, Potato, Banana, Apples, etc.

(3) Meat : Chicken, Fish, Bone mud, etc.

The standard type machine material : All the parts connecting with raw material are Stainless Steel , Stator and Rotor parts are SS 420. Other parts are Carbon steel. The machine material can be customized to 304 stainless steel or 316 Stainless Steel.

 

Model	Power	Capacity	Fineness	Weight	Machine Size
50	1.5kw	10-15 kg/h	50-100 mesh	50 kg	530*260*580 mm
80	4kw	60-80 kg/h	80-150 mesh	150 kg	600*410*930 mm
110	7.5kw	100-200 kg/h	80-150 mesh	175 kg	700*430*1000 mm
130	11kw	300-500 kg/h	80-200 mesh	285 kg	990*440*1000 mm
160	15kw	500-600kg/h	80-200 mesh	300kg	1000*460*1050 mm
180	18.5kw	700-800 kg/h	80-200 mesh	375 kg	1000*490*1100 mm
210	30kw	1000-1200kg/h	80-200 mesh	700kg	1260*600*1230 mm
240	45kw	1200-1500 kg/h	100-200 mesh	920 kg	1330*630*1280mm
300	75kw	3000-4000 kg/h	100-200 mesh	1300 kg	1500*800*1120mm

 

3.(5)Meat slicer machine

Mutton slicer 16 rolls, 8 rolls, 4 rolls, 2 rolls, 1 roll are available for sale, double layer stacking, touch screen operation, PLC control, servo motor drive, double screw horizontal feed, cutting height up to 26 cm, fully automatic operation

CNC frozen meat slicer suitable for all kinds of meat can be cut, suitable for large and medium-sized meat processing enterprises. It adopts electric pusher, electric presser, electric adjustment thickness, stepping pusher, meat processing, and the cutter automatically stops. The pusher plate automatically retreats, automatically stops, and the cutter opens. The conveyor belt is automatically synchronized, and the protective door is automatically turned off to ensure personal safety. High degree of automation, meat slice cutting, thickness adjustment, meat roll delivery, automatic shutdown, can be completed with one button, saving labor and time.

 

Model	MS-10	MS-20	MS-40	MS-60	MS-80
Slicer rows	1 roll	2 roll	4 roll	6 roll	8 roll
Frequency	60 times/min	60 times/min	60 times/min	60 times/min	60 times/min
Power	0.55kw	1.5kw	2.2kw	3kw	4kw
Capacity	20-30kg/h	75-100kg/h	150-200kg/h	220-300kg/h	300-400kg/h
Height of slice	10-150mm	10-160mm	10-160mm	10-160mm	10-160mm
Thickness of slice	0.2-10mm	0.2-10mm	0.2-10mm	0.2-10mm	0.2-10mm
Processing length	600mm	600mm	600mm	600mm	600mm
Szie (mm)	950*350*400	1450*600*1300	1450*880*1300	1500*1100*1400	1500*1300*1400
Weight(kg)	80kg	240kg	330kg	410kg	500kg

 

 

Models	MK50	MK60	MK65	MK80	MK120
Power	4kw	Main engine	2.0 kw	3kw	3.5 kw
Vacuum pump	6x-30kw	4x-3kw	6x-5.5kw	6x-7.5kw	6x-11kw
Heater	5kw	2.0kw	3kw	3.5kw	4kw
capacity	450-550kg/h	40-50kg/h	80-160kg/h	150-260kg/h	260-400kg/h
Whole weight	1550kg	270kg	550kg	760kg	915kg
Outside dimension	2450*1980*1770mm	1350*950*1170mm	1700*1300*1600mm	2000*1350*1750mm	2050*1400*1800mm

 

 

Model	capacity(KG/D)	weight(KG)	packing size(MM)	Power(kw)
MK50D	500	140	1500*680*1400	5
MK75D	2000	280	3000*830*1700	15
MK75C	2500	350	3900*830*1700	20

 

 

 

Model	MK-180	MK-210
Model size	30-60mm	30-80mm
Dimension(m)	1.6*1.1*1.3	1.9*1.4*1.45

 

 

Model	Capacity	Weight
BC-50	200-250 kg/h	550 kg
BC-80	250-300kg/h	700kg

 

4.(3)Carbonization furnace

Carbonization furnaces are also products of MIKIM. We have continuous carbonization furnaces, horizontal carbonization furnaces and suspended carbonization furnaces. You can choose according to your own needs.

The continuous carbonization furnace has high production efficiency. As the name suggests, the continuous carbonization furnace is continuous carbonization. It can produce continuous carbonization 24 hours a day and can carbonize several tons to dozens of tons of raw materials a day.

The design of the horizontal carbonization furnace realizes a continuous production method and effectively improves production efficiency. When the equipment is running, its high-capacity, continuous operation characteristics can significantly reduce the operating time and downtime of a single equipment. The horizontal carbonization furnace adopts advanced heat energy recovery technology, which effectively improves the utilization rate of heat energy and reduces energy consumption. This can not only save energy costs for enterprises, but also contribute to environmental protection.

The hoisting carbonization furnace is mainly composed of a furnace body, a furnace cover, a heating furnace, a coking template, a thermometer, and an electronic control system. Among them, the furnace cover and furnace door adopt a sealed structure to ensure high temperature and oxygen-free conditions during the carbonization process. The working principle of the hoisting carbonization furnace is to heat wood and other organic substances to high temperatures under limited air contact, causing them to decompose under high temperature and anaerobic conditions, removing oxygen, moisture and impurities, and converting them into solid Carbon material. Compared with traditional carbonization methods, the hoisting carbonization furnace has the advantages of short carbonization time and high equipment efficiency.

 

Model	Capacity (kg/h)	Power	Dimension
800	250-300	15kw	Diameter.80* Length 800cm
1000	500-600	22kw	Diameter 100* Length 1000cm

 

 

Model Name	Capacity	Mainly Included Parts	Shipping
QHL-1	2-3ton/24hour	1outer stove+3 inner pot	LCL
QHL-2	5-6ton/24hour	2outer stove+6 inner pot	FCL 1*20GP

 

 

Serial number	Liner size	Outside size	Weight (kg)	Output (kg)	Volume m³
1	Ф0.8*1.5(m)	Ф1.8*1.1*1.4(m)	350	100	0.76
2	Ф1*1.5(m)	Ф1.6*1.1*1.8(m)	500	260	1.177
3	Φ 1*3(m)	Ф1.5*3.3*2(m)	850	400	2.355
4	Ф1.5*3(m	Ф3.3*1.8*2.5(m)	1377	600	5.3
5	Ф1.5*3.8(m)	Ф1.9*2.5*4(m)	2000	800	6.7

 

 

 

 

Model	Power (kw)	Capacity (t/h)	Inlet size	Blade	Dimension(m)	Weight
B-420	7.5 / 11	0.3~0.8	15*15 cm	3 Pcs	1.2*0.5*0.7m	160 kg
B-600	15	1~1.5	18*18 cm	3 Pcs	1.5*0.6*1.1 m	320kg
B-700	22	1.5~2	20*20 cm	3 Pcs	1.55*0.7*1.15 m	450kg
B-800	30	2~3	22*22 cm	4 Pcs	1.90*0.8*1.3 m	600kg
B-1000	37	4~6	25*25 cm	4 Pcs	2.05*0.9*1.6 m	800kg
B-1200	55 / 75	6~8	33*33 cm	4/6 Pcs	2.6*1.2*1.8 m	1100 kg
B-1500	90 / 110	10~15	40*40 cm	4/6 Pcs	2.9*1.4*2.4 m	1800 kg

 

 

Model	Diameter(mm)	Size of inlet(mm)	Quantity of blades	Working capacity(t/h)	Power (kw)	Rotating speed
AC-500	1500*650*850	200*180	4	1-2t/h	15	2200r/min
AC-600	1500*700*1000	230*210	4	2-3t/h	18	2200r/min
AC-700	1550*750*1050	240*240	4	2.5-3t/h	22	2100r/min
AC-800	1600*800*1100	260*260	4-6	3.5-4t/h	37	2000r/min
AC-1000	2000*1100*1300	300*300	4-8	4-5t/h	45	2000r/min

 

 

Mobile wood chipper
Model No.	AK-6130D	AK-6130
Engine type	Diesel engine	Motor
Power	28 HP	22 KW
Cutter drum Dia.	300	300
Start way	Electric start	Air switch
Speed	2600	2900
Blade	3	3
Feed press roller Dia.	280	280
Feed roller power	hydraulic	hydraulic
Feeding size (mm)	300*200mmm	300*200mm
Tires	165/70r13	165/70r13
Discharge Direction	360°	360°

 

 

 

Model	auxiliary power	Width of spread
5500	30-60hp	8~12
5500A	30-60hp	8~12

 

 

Operating range (cm)	90
Transportation clearance (mm)	≥300
Operating hourly productivity (h㎡)	≥0.17
Excavator type	flat shovel
Working depth(cm)	150-250