The feed extruder affects the product in the finished material of the equipment
The feed extruder can prevent non-finished materials from entering the fuel injection section and waste grease, and can reduce the impact of the powder on the equipment and finished materials after the fuel is sprayed. The quality classification is placed before the finished product is packed in bags. Because the material is lifted into the warehouse through the front line, powder will be generated. At the same time, if the roller is sprayed, the powder will also be accumulated in the roller. The powder will follow the rotation of the roller and will agglomerate into powder balls and be mixed into the finished product. The dryers also use steam and a small amount of small puffing units to use electric heating, which inevitably involves the recycling of steam condensate jacket cooling water. Everyone directly discharges it, so we should develop the consciousness of saving water from now on. At the same time, this can also reduce production costs. The hot water pool sealed in the feed extruder of the dryer penetrates into the outer packaging bag, which affects the packaging bag, and makes the nutritional composition of the feed adopt two graded screening.