1. The influence of raw materials on the mixing effect
In feed processing, generally speaking, the feed mixer uses more than 3 in the process of feed composition. The smaller the difference of the physical materials, the greater the possibility of mixing after mixing the raw materials. Of course, it is not easy to separate them, but If the physical difference is too large, it will affect the mixing effect of the feed mixer.
2. Feed raw material processing requirements
Each feed mixer has corresponding technical parameters. For example, vertical feed mixers and single-shaft twin-screw mixers are usually used to mix dry powder raw materials. If you need to add liquid, you can use a double-shaft paddle mixer. So for farmers, your feed ingredients will determine which type of mixer you can use.
3. The effect of sequence on the mixing effect
If the raw materials are mixed in a certain proportion, then the small series recommends to feed the mixer, input a large proportion of raw materials, and then put in a smaller proportion of trace elements or other nutrients. If the order is opposite, it is likely that the mixing effect of the raw materials is not very good.
4. The influence of rotation speed and mixer on the mixing effect
Generally speaking, the rotating speed of the drum feed mixer is 21. In fact, the rotating speed generally refers to the mixing time. The mixer stirs a batch of materials for about 15 minutes, the horizontal spiral belt mixer keeps it for 3 minutes, and the double-shaft paddle mixer The mixing time is faster. Of course, the mixing coefficient of the feed materials of each feed mixer is different. For example, the rotating drum feed mixer requires longer time to mix, but the mixing coefficient is higher.