pellet machine manufacturers guide you to solve the problem of low production The flexible application of straw has brought great development potential to the market. It is comm...
Nov 14, 2022
Advantages of the new straw pellet machine In addition to crops, corn stalks can also produce sorghum stalks, wheat stalks, cotton stalks, etc., which can be used for multiple [...
Feed pellet machine functions and uses are as follows Raw materials : The equipment can adapt to all kinds of materials, corn flour, wheat bran, straw, bean straw, soybean meal,...
The influence of pellet machine on rural development The needs of new rural construction: At present, most of the crop straw is stacked in front of the farmhouse, which is not o...
There are four reasons why the Biomass pellet machine is noisy at work 1, biomass pellet machine is likely to be a rolling bearing in a certain position of the problem, leading ...
Nov 09, 2022
Biomass pellet machine can process a variety of raw materials Biomass pellet machine to agricultural and forestry processing waste such as wood chips, straw, rice husk, bark and...
How does the wood pellet machine work? 1, the operator needs to be trained by the manufacturer's technical personnel before starting the operation, and read the equipment instru...
Cooling method of wood pellet machine 1. According to different load requirements, check and adjust the pressure of the relief valve of the pellet machine to make it correct. 2....
The discharge pipe is not smooth or blocked, and the feed is too fast, which will block the tuyere of the wood pellet machine; After finding out the fault, it is necessary to cl...
Reasons for blockage of wood pellet machine 1: Sometimes discharge occurs, sometimes it does not occur, which is generally related to the aging degree of the granulator template...
The reason for the high temperature of wood pellet machine 1. High temperature of natural climate and working environment leads to rising temperature of lubricating oil in the e...
Uneven feeding During the production process, if the feed is too fast, the abrasive tools and sawdust particles of the ring die may be damaged, or the ring die machine may be b...
