How does the wood pellet machine work?
1, the operator needs to be trained by the manufacturer's technical personnel before starting the operation, and read the equipment instruction manual at the same time to understand the equipment in all aspects.
2. Before switching on the power supply, it is necessary to check the fastening device and lubrication parts, and confirm that there is no problem before switching on the power supply.
3. Idling the new machine for a few minutes before supply, and putting it into production after confirming no abnormality.
4, the use of uniform supply, not too early or too late, and shall not put stones, iron and other hard foreign bodies into the supply device.
5. After daily work, all parts of the equipment should be cleaned in all aspects.
6, regularly check the worm gear, worm, lubrication block bolts, bearings and other parts of the rotation flexible wear, found defects in time repair, not forced use.
7. When not used for a long time, it is necessary to carry out waterproof, rainproof and moisture-proof work on the equipment. If necessary, anti-rust paint can be applied and covered with tarpaulin.
