Reasons for blockage of wood pellet machine
1: Sometimes discharge occurs, sometimes it does not occur, which is generally related to the aging degree of the granulator template.
2: Check the knife edge and filter. The clearance between the blade and the filter is appropriate.
3: The problem with the template is that the newly purchased new machine template needs to be run in, so the new machine needs the added fat. Generally, the moisture content of the feed should be controlled between 5-7%, and the scheduling gap between the pressure roller and the template is about 2mm. After adjusting the pressure roll, it is necessary to tighten the fixing bolts.
4: The granulator motor rotates. Motor rotation may be dangerous.
