Operation method of pellet machine at low temperature production
We can reduce the compression ratio of the mold by mechanical grinding to achieve the purpose of particle forming but the temperature is not high. Some provide small compression ratio molds for production through the technical guidance of pellet feed machine manufacturers. In addition, the old mold is used to achieve low temperature granulation. Generally speaking, the old mold has been used, the mold aperture taper becomes smaller, the thickness of the mold becomes thinner, and the extrusion temperature of such a mold will not be very high. And the temperature of the pellet machine itself can be controlled by the feeding amount and feeding uniformity of the material extrusion temperature.
