We can change the feeding speed and thickness by adjusting the speed of pellet machine. It is recommended that you first adjust the speed to a lower gear, start the pellet machine test, observe the feeding situation, and then gradually increase the speed. Of course, different materials have different requirements for the speed, which requires specific tests and adjustments.
When the pellet machine is feeding, if it is found that the material flow is not smooth or the feeding is uneven, it is recommended to turn on the vibrator. The vibrator can increase the vibration amplitude of the feeding port, which is conducive to the unimpeded flow of materials at the feeding port. At the same time, the vibrator also improves the fluidity and liquefaction of the material, making the feeding effect of the pellet machine better.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
If the pellet machine you are using has been used for a period of time, the vibrator may be worn or aged, resulting in poor feeding or even jamming of the pellet machine. At this time, replacing the vibrator may be the best way to solve the problem. Replacing a new vibrator can restore the normal feeding effect of the pellet machine and improve production efficiency.
If the pellet machine feed volume is too large or too small, the problem may be solved by adjusting the feed volume. Too large a feed volume may cause the feed port to be blocked or the pellet machine to be overloaded; too small a feed volume may cause the pellet machine to have low production efficiency. Therefore, we need to ensure that the feed volume is within the appropriate range. It is recommended that you adjust the feed volume slowly to avoid problems.