As a professional manufacturer of feed pellet machines, we are obliged to solve this problem for you: one main reason is the power consumption caused by the interaction between the water content of the material and the length and diameter of the mold holes. When using a feed pellet machine to produce feed pellets, we should control the moisture content of the material between 5% and 15%. If the material is too dry, it will cause serious wear and tear on the feed pellet machine.
If the water content of the material is high, we will not be able to produce feed pellets. In addition, the mold aperture and water content must be well matched or leakage will occur. The particle size, water content and die hole length of the material we use to make feed pellets have different effects on the power consumption per ton of feed pellet mill. If the material is crushed too much, it will cause serious damage to the moldboard and pressure rollers of our feed pellet mills. We try to keep the powder of this material as small as possible.
