Feed pellet mill output is too low or even not out of the grain or out of the powder is a lot of this problem, although not often, but if it occurs, it means that you in the pellet mill grinding process did not grind the pressure wheel and grinding wheel good, may appear similar problems due to the reasons for the initial use of the grinding wheel grinding holes with a poor finish, the use of abrasive grinding material grinding wheel or use a period of time, the pellet mill output will reach the normal output The output of pellet mill will reach the normal output after using grinding material to grind the grinding disk or after using for some time.
The moisture content of the feed is not well mastered will also affect the discharge of the pellet machine, the moisture inside the raw material should be mastered in 13%-20%, because the pellet machine has a drying and maturing function, the moisture inside the raw material in the pellet machine pressing process will be dried off, in the pellet machine pressing out of the pellet material, at room temperature under the condition of shade drying for 5-10 minutes can be loaded into the bag.
