The main tips for adjusting the length of pellet machine materials include adjusting the gap between the die rollers, adjusting the length, width or angle of the fabric scraper, and adjusting the cutter appropriately.
Adjusting the gap between the die rollers: It is key to ensure that the gap between each roller and the die is consistent. If the wear of the rollers is inconsistent, the rollers and screws should be adjusted in time to make the gap between each die roller consistent. New ring dies should be equipped with new rollers to ensure that the wear of each roller is consistent.
| Model | Capacity | Power | Dimension |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm |
| 150 | 120-150kg/h | 4kw | 115*35*80cm |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm |
| 260 | 500-600kg/h | 15kw | 138*46*100cm |
| 300 | 700-800kg/h | 22kw | 130*53*105cm |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm |
Adjusting the fabric scraper: If the feed amount of the pellet mill is uneven, it will cause large fluctuations in the pelletizing effect and affect the length of the material. By adjusting the length, width or angle of the fabric scraper, the uniformity of feeding can be improved, thereby controlling the length of the material.
Appropriately adjusting the cutter: The length of the pellets can be adjusted by the cutter. According to needs, the position of the cutter can be appropriately adjusted to control the length of the extruded long feed pellets.