Fault analysis and solutions for livestock and poultry feed production lines

1. Equipment blockage fault:

- Analysis: Equipment blockage may be caused by raw material accumulation, impurities entering or improper equipment operation.

- Solution: Clean up the deposits and impurities in the equipment to ensure the smooth flow of raw materials; train operators to operate the equipment correctly.

2. Electrical fault:

- Analysis: Electrical faults may be caused by power supply problems, poor line contact, motor failure or control system failure.

- Solution: Check whether the power supply is normal; check the line connection; repair or replace the faulty motor; check the circuits and components of the control system.

3. Transmission system fault:

- Analysis: Transmission system faults may cause unstable operation or shutdown of the equipment, which may be caused by loose drive belts, broken chains, worn gears or insufficient lubrication.

- Solution: Check the tension of the drive belt or chain and adjust it; replace worn gears; perform lubrication maintenance regularly.
4. Screen blockage failure:
- Analysis: Screen blockage may be caused by impurities or particles blocking the screen holes, or the screen is severely worn.
- Solution: Clean the impurities and blockages on the screen; regularly replace the severely worn screen.
5. Overtemperature failure:
- Analysis: The high temperature during equipment operation may be caused by poor lubrication, cooling system failure or excessive load.
- Solution: Check the lubrication system to ensure sufficient lubricating oil; check the working status of the cooling system; adjust the load to avoid overload.