Wood Sawdust Crusher Machine High Quality
Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of wood sawdust crusher machine high quality in China. If you're going to buy cheap wood sawdust crusher machine high quality made in China, welcome to get more information from our factory. All our products are with high quality and low price.
Wood chip crusher
1. The blade holder and blade on the rotor can be disassembled for easy cleaning, maintenance and maintenance;
2. Each moving knife has 4 cutting edges, which can be rotated 90° after wear to continue to use;
3. The main shaft is driven by the gear reduction box, running smoothly, low noise, large torque;
4. Adopt PLC program control system, can automatically reverse, make the machine run stably;
5. The box body is welded and tempered after welding to eliminate the welding stress;
6. The installation position of moving knife is precisely machined by machining center to ensure that the clearance between each moving knife and fixed knife is the same;
7. The moving tool holder is embedded in the tool shaft with high strength screws. On, can prevent welding type after long-term vibration caused by the phenomenon of knife drop.
8. Convenient transportation after tearing, can reduce transportation cost, increase transportation efficiency, convenient
secondary processing.
| name | Diesel Portable Wood Branch Chippers | ||||
| Diesel engine | 30HP | 40HP | 60HP | 75HP | 100HP |
| Engine type | 4100(Turbo) | 4105 | 4105(turbo) | 6105 | 6105(turbo) |
| Fuel consumption | 6L/h | 8L/h | 10L/h | 15L/h | 18L/h |
| Processing diameter | ≤150mm | ≤200mm | ≤230mm | ≤250mm | ≤300mm |
| Working capacity | 1500kg/h | 2500kg/h | 3500kg/h | 4500kg/h | 5500kg/h |
Equipment maintenance
Cleaning: Clean the feed and discharge ports regularly to prevent wood chips and impurities from clogging. Use compressed air or a soft brush to remove dust and debris inside and outside the machine, especially around the blades, bearings and motors. Check and clean the vents to ensure good heat dissipation.
Lubrication check: Check and replace lubricating oil or grease regularly to ensure that all parts that need lubrication (such as bearings, gears, etc.) are fully lubricated. Note that the choice of lubricating oil should comply with the manufacturer's recommendations.
Customer visit
Hot Tags: wood sawdust crusher machine high quality, China, manufacturers, factory, cheap, low price, made in China, Mobile Sawdust Machine, Sawdust Machine, Sawdust Making Machine
Send Inquiry
