1. Preparation
Before disassembling the feed pellet machine, the following preparations need to be made:
1. Turn off the power of the machine and unplug the power plug to avoid safety accidents.
2. Prepare the tools required for disassembly, including wrenches, screwdrivers, pliers, etc.
3. Install a bracket or lifter to lift the feed pellet machine to a suitable height during disassembly.
4. Prepare enough working space for disassembly, cleaning and maintenance.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
2. Disassembly steps
1. Disassemble the machine casing: first find the fixing screws of the machine, loosen the fixing screws with a wrench or screwdriver, and remove the machine casing.
2. Disassemble the rotor: Use a wrench or pliers to disassemble the rotor, and check whether the rotor is worn or deformed before disassembly. If so, it should be replaced in time.
3. Disassemble the screen: Use a wrench or screwdriver to disassemble the screen, be careful not to damage the screen, and do not damage or deform the screen.
4. Clean all parts: Clean all disassembled parts and thoroughly remove all kinds of residues, especially grease and other substances.
5. Check spare parts: Check whether all parts of the machine are worn or damaged. If so, replace or repair them in time.