Small Wood Chipper

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of small wood chipper in China. If you're going to buy cheap small wood chipper made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Large wood chipper
The small investment in wood crusher is mainly because the machine itself is simple, the smaller the machine, the simpler the construction, so the price is also very cheap. If the large machinery and equipment also need to be equipped with a lot of supporting equipment, such as feeding and discharging devices, so as to form a perfect production line, the relative price will be high, but the benefits are huge.

Wood crusher for crushing raw materials for a wide range of applicability, such as pruning down the trees, waste wood, wood, waste furniture, trimmings, scraps, straw, crops, etc., these raw materials recycling price is low, but the price is crushed after the original price of three or four times, and it is for this reason, the wood crushing industry is very hot.

After the wood crusher crushed materials after the use of high value, like a lot of environmental protection products is to use the wood crusher crushed materials used as raw materials, such as biomass pellets, charcoal, edible fungi stick material, etc., the value of these things is far more than wood.

Garden shredder chipper

Heavy duty electric wood chipper
The sawdust crusher is driven by a motor to make the rotor inside the machine (with blades or hammers on the shaft) rotate at high speed. After the materials (such as sawdust, wood chips, branches, etc.) are evenly fed into the crushing chamber, these materials are subjected to the combined effects of cutting, tearing and impact under the action of the high-speed rotating blades or hammers. The action of these forces causes the materials to be gradually broken into smaller particles.
Feeding: The raw sawdust is fed into the crushing chamber through the feed port. The design of the feed port usually takes into account the size and shape of the material to ensure that the material can enter the crushing chamber smoothly.
The role of the blade or hammer: In the crushing chamber, the high-speed rotating blade or hammer cuts, tears and impacts the material. The action of these forces causes the material to be gradually broken into small pieces.
Airflow and collision: In addition to the direct action of the blade or hammer, the airflow generated when the rotor rotates will also cause the material to rotate in the direction of the blade and collide with each other in the crushing chamber, further promoting the crushing of the material.
Screening: The crushed material is screened through the screen. The screen is located below the crushing chamber, and its aperture size can be adjusted as needed. Qualified fine materials are discharged through the screen holes, while larger materials remain in the crushing chamber for further crushing.
Discharge: Qualified materials after screening are discharged from the discharge port for subsequent use or processing.

Garden wood chipper

Wood crusher
When the wood crusher is working, the staff should avoid the tangent direction of the hammer's rotation, and it is not allowed to feed with gloves, the hands cannot exceed the safety line, and it is forbidden to use iron tools and sticks instead of hands to feed.
The wood crusher and the power unit should be installed firmly. If the wood crusher is fixed for a long time, it should be fixed on the cement plane; if the wood crusher is mobile, the unit should be installed on the base, and ensure that the pulley grooves of the power machine and the wood crusher are in the same reversing plane.
After the wood crusher is installed, check the tightness of each component. If loose signs are found, tighten them. At the same time, check whether the belt tightness is appropriate.

Qualification & Honor

Hot Tags: small wood chipper, China, manufacturers, factory, cheap, low price, made in China, potato digging equipment, Almond One Stage Shelling Machine, Almond Peeling Machine, feed processing machine, small pull behind manure spreader, sweet potato picker