Disc Tree Shredder

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of disc tree shredder in China. If you're going to buy cheap disc tree shredder made in China, welcome to get more information from our factory. All our products are with high quality and low price.

Tree shredder
We all know that wood shredder is a device that can crush wood into chips, such as a lot of waste wood in rural areas is difficult to deal with, difficult to utilize, we can collect them and process them with wood shredder.

Wood chipper shredder for many raw materials, such as twigs, branches, logs, templates, wood chips, scraps, trimmings, waste furniture, straw, crops and other crushing process, these materials can be crushed according to the different uses of the factory sent to production.

Disc wood chipper shredder has high utilization value and wide range of application. In these raw materials mixed with other materials, can be fermented into organic fertilizer, can be very good to improve the soil condition, but also can effectively promote the growth of plants and crops.

Industrial wood chipper

Electric chipper shredder
After the wood crusher runs for 300 hours, the bearings must be cleaned and the lubricating oil replaced; when filling the oil, it is better to fill 1/3 of the gap of the bearing seat, and no more than 1/2 at most. When the machine stops running for a long time, the transmission belt should be removed.
The wood grinder stops feeding before stopping. After the spare materials are cleaned, cut off the power supply and stop running. Cleaning and maintenance should be carried out after stopping.
When the wood crusher starts to operate, pay attention to whether there are sundries on the wood crusher machine, check whether the wood crusher is reversed when testing the machine, and put less material to see whether the finished product meets the standard. When the wood crusher customer buys it and goes home, try to wait until the previous piece of wood enters the feed port before putting the second piece of wood in when installing and testing the machine, so as to avoid jamming.

Garden chipper

Wood chipper shredder
The wood crusher should feed evenly. If there is noise, high temperature of bearings and body, or material spraying outward, the machine should be stopped immediately for inspection and troubleshooting.
Before starting and shutting down the wood crusher, the circuit should be checked to avoid leakage. The length of the wood must be moderate, not too long, preferably less than 30 cm, and not too thick. The discharge port and feed port should be as spacious as possible to avoid some accidents.
After the wood crusher has been operating for 300 hours, the bearings must be cleaned and the engine oil replaced; when filling the engine oil, it is better to fill 1/3 of the gap in the bearing seat, and no more than 1/2 at most. When the machine is shut down for a long time, the transmission belt should be removed.
Before shutting down, the wood crusher should stop feeding, wait for the material in the machine to be removed, and then cut off the power supply and shut down. Cleaning and maintenance should be carried out after shutdown.

Customer visit

Hot Tags: disc tree shredder, China, manufacturers, factory, cheap, low price, made in China, Red Dates Seed Removing Machine, Fire Wood Briquette Press, small farm potato digger, 32 Trays Pizza Roasting Oven, Sesame Butter Cooling Machine, Vegetable Bubble Washing Cleaning Machine