Disc chipper is a special wood chipper for producing high-quality wood chips. It is widely used in the material preparation section and single wood chip production base of papermaking, particleboard, MDF and other industrial production. The cutting raw materials are mainly logs. The machine has compact structure, reasonable layout, easy installation, convenient operation and maintenance, and high production capacity; when cutting logs, the quality of wood chips is high, and the length of wood chips can be freely adjusted within the specified range. It is an advanced disc chipper.
Drum chipper series products are special equipment for producing wood chips. This product is widely used in particleboard factories, medium and high density fiberboard factories, straw factories, biological power plants, wood chip factories and other industries and the material preparation section in the production of manufacturers. The former recommended equipment. This product has advanced structure and the main raw materials for cutting are small-diameter wood, wood harvesting, processing residues (such as branches, branches, veneers, slats, round wood cores and waste veneers, etc.), and can also be used to cut non-wood materials (such as sugarcane, reed, bamboo, etc.).
As the actuator of the wood chipper, the cutter head is a key part of a wood chipper. After a long time of use, the blade will become dull. Therefore, the cutter head must be properly maintained during use, and regularly Sharpen the blade to keep it sharp. This greatly increases the productivity of the wood chipper. In addition to the cutter head being a key component that needs attention, the bearing is also very important. If the lubrication of the bearing is not enough, it will greatly affect the speed of the wood chipper, thereby affecting the processing efficiency of the machine. Therefore, when the bearing has the problem of slow rotation caused by roughness, it is necessary to replenish oil to the bearing in time to increase the lubricating degree of the bearing. When adding lubricating oil to the bearing, special attention should be paid to ensure the purity and purity of the lubricating oil. The cleaning on the bearing prevents excessive wear and premature aging of the bearing due to excessive dust accumulation.