1. What are the possible reasons for the poor effect of the extruder?
1. Poor quality of raw materials. The quality of raw materials is a key factor affecting the effect of the extruder, including moisture, starch content, protein quality, etc. If the moisture content of the raw materials is too high, they carry impurities or are improperly stored, the effect of the extruder will be affected.
2. Poor equipment condition. Improper equipment installation, severe wear, improper adjustment and other factors will also affect the effect of the extruder. For example, damage and wear on the feed port, discharge port, knife wheel and other parts of the extruder will affect the operation effect of the extruder.
3. Unskilled technology. The operation of the extruder requires skilled personnel. If the operation is improper, such as improper control of temperature, speed, time, etc., it will directly affect the effect of the extruder.
| Model | 45 | 65 | 75 |
| Power | 5.5KW | 15KW | 18.5KW |
| Yield | 140-160 | 200-240 | 260-320 |
| Weight | 350KG | 500KG | 550KG |
| Capactiy | 50KG/H | 150KG/H | 200-300KG/H |
| Size(mm) | 1800*810*1080 | 1700*970*1240 | 1700*970*1240 |
2. What are the solutions to the poor effect of the extruder?
1. Check and replace raw materials. First of all, you need to check the quality of the raw materials. If you find any problems, you must replace them in time. Secondly, you need to ensure that the raw materials are stored in a dry and ventilated environment to avoid affecting the raw materials.
2. Maintain the equipment regularly. Regular inspection and maintenance of extruder equipment, timely replacement of worn parts, adjustment of the gap and position of worn parts, and cleaning and disinfection of equipment can effectively improve the effect of the extruder.
3. Strengthen technical training. Extruder technology and operation are very important parts, which require professional training and guidance. Operators need to master the correctness of each step, including temperature, time, speed and other parameters. If the technology is too poor, it needs to be improved through continuous practice.
4. Adjust the extrusion process. According to the actual situation during the operation of the extruder, the effect of the extruder can be gradually improved by gradually adjusting the production process, such as controlling parameters such as temperature, time, pressure, load, etc.