First, turn off the power switch of the extruder and disconnect the power plug to stop the extruder. Then, prepare the necessary tools, such as screwdrivers, wrenches, pliers, etc., and wear gloves to avoid hand injuries.
Before starting to disassemble the extruder, we need to clean it, including removing residues and debris, etc. During the disassembly process, we also need to pay attention to the following points:
1. When disassembling, it is necessary to remove the various components of the extruder from the outside to the inside in order to avoid danger caused by the residual pressure inside.
| Model | 100 | 120 | 135 | 160 |
| Power | 37KW | 55KW | 75KW | 90KW |
| Yield | 700-1000 | 1200-1500 | 1500-1800 | 2000-2400 |
| Weight | 750KG | 850KG | 950KG | 1200KG |
| Size(mm) | 1970*2900*1150 | 2200*2900*1200 | 2350*2900*1200 | 2350*2900*1400 |
2. During the disassembly process, special attention should be paid to the compressed air and high-temperature components of the extruder.
3. During the disassembly process, pay attention to the parts of the extruder to avoid damage or loss.
4. After disassembly, clean and maintain the extruder in time, and remember to keep the parts properly.
After the extruder is disassembled, we need to clean and maintain it. First, the parts need to be classified and the parts that need to be cleaned should be cleaned separately to maintain their operating efficiency and hygiene, and be careful not to let water flow into the electrical parts. Then, the disassembled parts need to be inspected and maintained, especially the rubber retaining rings, leaking joints and other parts need to be inspected and replaced to ensure the working efficiency and safety of the extruder.