1. Choose the appropriate feed machinery template aperture. The aperture used is too small, the output is low, and even the discharge is uneven. Therefore, when purchasing, you can consult the technician in detail to choose the appropriate ring die.
2. Adjust the gap between the template and the pressure wheel. Appropriate pressure can achieve good results in the maturity and density of the pellets. There are pressure adjustment screws on the feed pellet machine to adjust the balance and tightening of the pressure screws on both sides.
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
3. Use a uniform feeding method to make the pelleting of the feed machinery pellet machine smoother and keep the machine running at a high speed. If you feel that you can't do this, you can buy a feeder at the same time for easy use.
4. Pay attention to the cleaning and protection of the feed machinery pellet machine. After each use, regularly inject butter and lubricant to improve the efficiency of use.