The importance of screens and feeders in pellet mills
Due to the small size of powdered and granular substances, they tend to stay inside the machine and cause contamination in the pellet machine, during processing, which will seriously damage the performance of the equipment in the long run. Therefore, it is very important to clean all parts of the equipment during use. Let's take a look at the importance of cleaning the pellet mill filter and feeder.
I. Filter Screen
This type of pellet mill has a filter screen assembly that is the main guarantee of filtering the particulate matter and making the pellet processing purer and of high quality. It is for this reason that the filter screen can get severely clogged after prolonged use and work. Therefore, when using this type of pelletizer, it should be cleaned regularly to clear the clogging of the filter screen, which is conducive to good results in pelletizing and granule processing.
Second, feeder
The feeding link of the biomass pellet mill is the main prerequisite for the completion of granulation and pellet processing. Without the feed channel, it is impossible to complete various operations such as pellet crushing and processing. Therefore, the feeder will be blocked after long-term use. If the size of the material carried in the device is too large, it will be severely clogged, resulting in a decrease in the feed rate. Therefore, daily cleaning of the feeder is a basic method to ensure the normal operation of the machine.
The above is an introduction to the knowledge of the pellet mill screen and feeder in terms of cleaning. In the structural composition of this type of mechanical equipment, the screen and feeder are two accessories that are particularly easy to form a blockage, once the phenomenon of blockage will seriously affect the normal working condition and efficiency of the equipment, but also damage to the revenue, so the staff treat these two accessories seriously.
