The difference between straw pellet machine and straw block machine
From the point of origin, both are similar. If we trace back to the source, straw pellet machine can be traced back to the pellet machine used for feed. Later, the biomass energy industry developed and expanded before gradually developing out of the feed industry, claiming to be a line. But now some straw pellet body can clearly see the appearance of feed pellet machine. Some manufacturers with relatively backward development still use straw feed pellet machine to do straw fuel, such as the common flat mold straw pellet machine. Not to say that the flat mold granule machine can not be done, but to mass production, or rely on centrifugal high efficiency granule machine.
The straw pressing machine is similar to the straw coal forming machine. A wave of prosperity has spawned this machine. Its structural principle has the same and also has the difference with the particle. Because within this, the self is divided into different structures. One is on the basis of the flat mold pellet machine, the transformation, the paparazzi similar to the flat mold pellet machine, but the aperture of the mold is much larger. The other is a type of stamping press, which has a very different structure and can make very long chunks.
From the appearance of the finished product, the difference is very obvious. The straw block machine can make a large piece with a diameter of 10 centimeters, but also can be made into a cylinder, square and other different characters. No negative pressure block machine name.
The straw pellet machine, the "ability is limited", can only suppress about 8 mm rod particles. It's like cigarettes.
But it's not the size of the finished product that makes a machine good or bad. Sometimes big things don't make people like them. This is what an unfortunate piece of straw looks like. The finished product of straw pressing machine can not be fully burned when burning due to its large volume. That's the big question. And there is also a lack of density. Not suitable for boiler use.
