Requirements for raw materials for sawdust pellet machine
First, the size of raw materials is required
When the sawdust particle mechanism is granular, the size of the raw material is required. The size of the general raw material must be less than 5MM after crushing. The specific crushing size should also be determined according to the expected diameter of the particle and the size of the diameter of the granular machine die. If the raw material is crushed too big or too small, it will affect the yield and quality of the particles, and even cause no material discharge.
Two, raw material moisture requirements
Sawdust particles have strict requirements on moisture. No matter what kind of raw material, the moisture must be controlled within 12-18%. If the moisture is too large or too small, the particles will easily break or loose.
Three, raw materials completely get rid of adhesive
It is not necessary to add any adhesive when making sawdust particles, because sawdust itself is a crude fiber raw material, which has a certain bonding property. After the sawdust particle machine extrusion can be formed naturally. If there is no adhesion of the raw materials do not be afraid, the vertical ring mold wood pellet machine produced by we can help you, the equipment can produce cars because of the special structure of the strong pressure, is difficult to form the raw materials. The resulting particles are dense and smooth.
