The correct use of sawdust granulator
Because the working temperature of the sawdust pellet machine press roller is very high, the timely and reasonable continuous oil supply and heat loss can effectively extend the service life of the press wheel and increase the working output of the effective time of the press wheel. The sawdust pellet machine press roller is charged with squeezing the sawdust and other raw materials into the inner hole of the mold, and pushing the back raw materials to the front raw materials, so as to finally achieve the purpose of forming.
Adequate and reasonable grinding must be carried out before the equipment is used. The manufacturer generally requires reasonable grinding according to a certain formula in the manual of sawdust pellet machine. Because the ring molding roller of sawdust particle machine is a heat treatment part, in the process of heat treatment, some burrs are generated in the inner hole of the ring die, and these burrs will hinder the flow and forming of materials in the pressing of sawdust particles.
We should be good at handling the failure of the pellet machine in time, and quickly replace the faulty wearing parts to ensure the continuity of the production process. Sawdust particle machine has high load and high labor intensity, so it is necessary to carry out continuous tracking and monitoring in the whole production process. In order to work more efficiently and quickly, we hope customers can use the sawdust particle machine correctly. In addition, the equipment has the characteristics of low wear rate, press roll die plate, high efficiency centrifugal pressure, and long service life of the millstone.
