First, the oil is diluted. Before the lubricating oil is injected into the wood pellet machine, the lubricating oil and oil are added in a fixed container in accordance with a certain proportion, mixed and stirred evenly, and then through the pipeline or mechanical help, injected into the lubricating oil filling part of the wood pellet machine, and has been filling until the overflow. This can effectively reduce the filling difficulties caused by low temperature and lubricating oil solidification.
Second, the electric heating tube. Under the condition of conditions, in accordance with the north of the ground water pipe, solar energy of the electronic heating tube, in the periphery of the wood pellet machine lubricating oil system laid electronic heating tube, in order to electronic heating temperature will melt the lubricating oil in the pipeline, to ensure the normal oil supply of wood pellet machine, continuous work.
Third, artificial heating. Before the production of wood pellet machine, the lubricating oil is put into the fixed container, heated with boiling water at the lower part, and injected into the various parts of the wood pellet machine in the melting state.
Fourth, running state bet oil. The operation of wood pellet machine will bring temperature to the filling part of each lubricating oil, which will bring convenience to the filling of lubricating oil. At this time, the safe way to inject lubricating oil is also a good method.
Fifth, a heated workshop. The warm room can be lubricated with wood pellet machine under normal condition.
