Pellet machine to add lubricating oil to pay attention to what
Usually when we use the pellet machine, the lubrication system inside the equipment is an essential part of the entire production line, if the pellet machine operation lack of lubricant, then the pellet machine can not carry out normal operations. The following is to take a specific look at the pellet machine to add lubricant considerations.
In the manufacture of a pellet machine equipment, the manufacturer has stipulated the selection of lubricants suitable for the equipment, and not all lubricants can make the machine to maintain lubrication effect, in order to equipment in different environments under the temperature difference, must be a reasonable choice of lubricants, the use of lubricants necessary to add different additives, different additives performance is also different, so the different equipment in accordance with the field conditions of the choice of lubricants are also Quite important, so that can play a good lubrication effect.
Pellet machine oil lubrication should not be in order to save costs by directly adding waste oil, take appropriate measures, but the waste oil can be used again lubrication, must not directly add the waste oil, which will cause quite serious damage to the pellet machine effect, the waste oil can be dewatered with oil-water separator, for the lubricating oil in the debris, can be removed through the filter. And not all lubricating oil is pellet machine can be applied.
A pellet machine equipment in the factory on the strict provisions of its oil injection oil capacity, the operator in the oil injection should be familiar with the machine before the oil label. After all, too much or too little refuelling will have a bad effect on it.
