Method of adding lubricating oil to wood pellet machine
The wood pellet machine uses diesel engine oil or uses diesel engine oil that meets API CF-4 specifications. According to the region, season, temperature selection of different viscosity and grade of oil. In winter, low viscosity oil (such as 15W / 40) is selected for low temperature areas, and conversely, high viscosity oil (such as 20W / 40) is selected.
The amount of lubricating oil added shall be subject to the safe oil level, and the lubricating oil shall be added to the safe oil level once, otherwise the machine will not be able to operate and start. Under normal circumstances, the pelletizer has accumulated about 1000 hours of production, and the lubricating oil shall be replaced once. When replacing the lubricating oil, all the waste lubricating oil shall be discharged, and the new lubricating oil shall be added after cleaning.
No special requirements of the parts of the bearing every 300 hours or so, to clean the bearing to rejoin the grease (generally choose 3# general lithium grease). The amount of grease added to the bearing part is about one third of the capacity of the bearing room. Adding too much grease to the bearing will generate heat and increase power consumption; Under normal circumstances, the reducer is required to change the lubricating oil for every 1000 hours or so, and the amount required to be added is the standard oil level.
In summary, wood pellet machine adding lubricant is a kind of maintenance, is a positive preventive measure, enterprises to establish the maintenance of machinery and equipment, provide the necessary material conditions and a good working environment. I believe that as long as we pay attention to the maintenance of wood pellet machine in the process of usual use, wood pellet machine will be able to work smoothly and bring benefits to you.
