Code for use of feed pellet machine in winter
Feed pellet machine in winter, we should pay attention to the following problems: 1. Feed pellet machine's own steam access temperature and time, as well as the ambient temperature. Feed pellet machine work to implement the first steam, after feeding the principle of production, to ensure the temperature of feed pellet machine modulator. Production workshop as far as possible to achieve heating supply, to ensure the feed pellet machine and production personnel work under normal temperature. 2. Scientific injection of lubricating oil. Cold may be because of low temperature to feed granule machine lubrication oil solidification, resulting in difficult lubrication oil filling, and low temperature may also cause lubricating oil pipeline oil supply discontinuity phenomenon, this is the surface from the outside observation of no lack of oil, but later may cause wear because of lack of oil. Third, the dilution of lubricating oil. The lubricating oil of feed pellet machine can be realized by means of mechanical auxiliary oil injection, artificial heating, oil dilution and so on. Fourth, clean the mold press wheel of the studio. After each work, it is necessary to strictly clean the extrusion studio of the mold press wheel of the feed pellet machine to prevent the freezing of the extrusion studio due to large moisture and low temperature and affect the normal work of the feed pellet machine. Fifth, timely overhaul and reasonable maintenance. The overhaul and maintenance of feed pellet machine is very important, regular maintenance on time, and troubleshooting before production, timely replacement of damaged vulnerable parts, to ensure high yield and efficient use of feed pellet machine. Winter is the busy production of feed pellet machine, do a good job of equipment maintenance work to achieve greater production, to create greater economic benefits, to achieve greater benefits.
