Pellet mill as one of the most important equipment in the production of feed pellets, its performance advantages and disadvantages are able to directly affect the production quality of feed pellets. The processed particles have a smooth surface, moderate hardness, and the internal degree of maturation is deep and penetrating. Dry in dry out, easy to seal storage, feed pellet machine can naturally warm up to 70-80 degrees, so it can kill some disease-causing microorganisms and parasites. It is also suitable for small-scale farmers who lack three-phase electricity.
The first time you use the feed pellet mill must be broken in, otherwise it can not be used normally. When the feed pellet mill is operating, don't put your hand into the feed opening, if necessary, you can use a wooden stick to help feed. Before starting the feed pellet mill, you can add less material before you can start it. Before shutting down the feed pellet mill, you should leave some feed particles inside the feed pellet mill. Prevent the press wheel and grinding disk from idling. If the feed pellet mill machine is stuck during the working process, we should stop the machine immediately, press the press wheel until the bolt is loose and flat, and then restart the machine. The adjusting roller bolts must be loosened after each work is completed. There is also usually before use, check the belt tightness to prevent low machine output, belt slippage and so on.
