We use the most is first crushed and then in the granulation. First of all, we will use the crusher to crush all kinds of feeds that need to be crushed, the feeds that don't need to be crushed are directly put into the feed mixer, and the crushed feeds are also put into the feed mixer. This is to improve the crushing efficiency of the crusher.
The feed pellet mill has wide applicability, low noise and low failure rate. Easy to operate, low noise, no water, hard and smooth particles. The use of dry in and dry out, like corn, barley, rice and other cereal raw materials can be directly processed without crushing, low moisture content of the particles, storage time relative to the powdered feed to be much longer. Feed pellet mill has maturation, not only can improve the attractiveness of nutrients, but also can make the trypsin resistance factor in grains and legumes denatured, reduce the negative impact on digestion, and at the same time can kill a variety of parasitic eggs and other pathogenic microorganisms, reduce a variety of insects and insects. Digestive Diseases.
