How to deal with the different response of the gear box of the screw press?
The gear box of the screw oil press has abnormal sound
The gearbox of spiral oil press generally has two faults, one is the aging of the gear, the other is the damage of the bearing. If the start of idling sound is too loud, the gear wear is serious, and it should be replaced immediately. If there is a chuck sound or other noise in operation, the bearing problem should be considered.
Screw oil press gearbox oil leakage how to do
Gear box oil seal oil leakage phenomenon is more common, but also more difficult to cure, the traditional way is to replace the oil seal. Common problems are bearing seat wear, gear damage, dynamic seal oil leakage, skeleton oil seal damage.
Ninety percent of the oil leakage is caused by the corrosion and aging of the oil seal. Especially, the rubber oil seal will lose its plasticizer when it receives the influence of alternating warm and cold temperature changes for a long time. As a result, the oil seal will shrink and harden, resulting in the loss of elasticity and more serious fracture. They don't wait for it to break.
Regular inspection, correct installation and good lubricant can help increase the service life of oil seals, but from the fundamental point of view, we should choose good oil seals, otherwise treat the symptoms rather than the root causes, and change to change. Frequent replacement of oil seals is time-consuming and laborious.
