1. What to do if the output of Yunnan wood shredder decreases: The decrease in output indicates that the blade may be dull. Replace or remove the blade and polish it with a sharpener; the blade has a long service life and can be recycled until the blade is worn out.
2. What to do if the bearing is overheated: The belt is too tight, the bearing is damaged, or the rotor and the bent shaft are unbalanced, etc., which will cause the bearing to overheat. What to do if you want to solve it? Adjust the belt tightness, add and replace engine oil, and replace rotors, shafts, bearings, etc., all can be tried.
3. How to solve the strong vibration of the machine: the main shaft bearing is damaged or bent; the foot connecting screw is loose; the hammer is installed incorrectly; the weight deviation of the two sets of hammers is too large, etc., which will cause strong vibration and wear. Use the face rotary hammer to install the error factory maintenance hammer assembly, and the hammer of the crusher should be installed with correct measures to maintain the balance of the rotor.
4. The fan blade falls off or breaks: when the auxiliary fan blade falls off, the product fineness will suddenly become thicker and fluctuate greatly. At this time, the wood crusher body has a lighter swing, so it should be shut down in time for inspection and treatment.