If the material is not sufficiently crushed, it will cause the material particles of the pellet machine to be too large to be pelletized, resulting in not discharging the material, and the water content of the raw material is too high or too low. If the water content is too high, the powder will not be too much, but the hardness of the particles is low, and the particles produced by the feed pellet machine are easy to loose. If the water content of raw materials is low, it will be difficult to extrude and mold, resulting in too much powder.
The cutter is not in the right position, the material is extruded into powder (but if the hole is regularly blocked, it is unlikely), check whether the voltage is stable, these are some of the reasons why the feed pellet machine does not produce material or loose, we have read the heart a little bit of a number, feed pellet machine in the event of a problem, don't worry too much, you can try these methods.
