Causes of failure:
1. The flat die has poor finish when it is used for the first time;
2. The moisture content of the material is too high or too low;
3. The gap between the pressure roller and the flat die is too large;
4. The pressure roller or flat die is seriously worn;
5. The V-belt is slipping or aging.
Troubleshooting method:
1. Grind and lubricate with oil-containing materials, and the output will increase after working for a period of time;
2. Adjust the moisture content of the material;
3. Adjust the clamping bolt;
4. Tighten or replace the V-belt
Too much powder in the feed pellets
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
Causes of failure:
1. Low moisture content;
2. Excessive wear and thin thickness of the flat die.
Troubleshooting method:
1. Increase the moisture content;
2. Replace a new flat die.
Feed particles appear rough
Fault causes:
1. High moisture content;
2. Flat mold is used for the first time.
Troubleshooting methods:
1. Reduce moisture content;
2. Repeated grinding with oily feed.