What should be the process flow of pet feed production line?
A. Pet feed production line configuration.
Powder mixer → loading machine → puffer → conveyor → multi-layer oven → flavoring line → cooling conveyor → vibrating screen → packaging machine
B. Pet feed production line equipment introduction:
1. Mixing machine: add a certain proportion of water to the raw materials corn flour, rice flour, soybean flour, fish flour, meat flour, grain flour, additives, etc. to fully mix well.
2. Feeding machine: use the motor as the power screw conveyor to convey the well-mixed raw materials to the feeding hopper of the twin-screw extruder. This equipment is convenient and fast feeding, save labor, high efficiency.
3. Twin-screw feed expander: mixed raw materials in the high temperature and high pressure environment and the extrusion of the twin-screw, the raw material in the structure of the starch changes into easily absorbed nutrients, through the feed mold extrusion, by adjusting the rotating speed of the rotary cutting motor until the speed of the size of the same length of the feed particles. Specific pellet size and shape are obtained by changing the mold. Feed puffer adopts frequency conversion speed control technology, more energy-saving, speed control is more stable, the motor running current, speed can be seen directly through the frequency converter panel to ensure equipment safety.
4. Conveyor: convey the produced feed pellets inside the multi-layer drying equipment.
5. Multi-layer oven: the oven is divided into electric oven, fuel oil oven, gas oven and steam oven, the temperature between 0-150 degrees through the control cabinet to adjust themselves, the inside of the oven for the stainless steel mesh belt, conveying smooth, low failure rate. The feed particles are circulated through multi-layer S-rail, drying the feed particles to safe moisture content and increasing the shelf life.
6. Spraying and Seasoning Line: Spraying machine sprays oils and food attractants, etc. The seasoning cylinder has octagonal cylinder, round cylinder, lifting single drum and double drum seasoning line, which is configured according to the output and the nature of the products, and the oils and fats are sprayed on the surface of the feeds, and at the same time, the minced meat and spices are sprayed and sprinkled evenly. After this process can also remove burrs, burrs on the surface of the feed particles, making the surface of the feed particles smoother.
7. Cooling Conveyor: Reduce the temperature of the surface of the dried feed particles, promote the solidification of fats and oils, reduce the temperature of the particles to facilitate packaging.
8. Vibrating sieve: sieve off the excess of the outer scattering material and granule dregs, to ensure the quality at the same time, to ensure the reuse of raw materials.
9. Packaging machine: manual sealing machine and automatic packaging machine can be used, please call the manufacturer for more details.
