Coconut Shell Carbonization Furnace

Tianjin Mikim Technique Co., Ltd. is one of the most experienced manufacturers and suppliers of coconut shell carbonization furnace in China. If you're going to buy cheap coconut shell carbonization furnace made in China, welcome to get more information from our factory. All our products are with high quality and low price.

carbonization furnace is a new type charcoal machine, it could deal with wood waste, wood branch, sawdust briquette, palm shell, coconut shell and etc.

carbonization furnace

1. Easy operate and maintain, higher safety, energy saving                                                
2. High carbonization rate, no smoking, little pollution, 
3. Newly developed carbonization stove, which can dry the materials with the superfluous energy produced in the process of carbonization. 6-8 hours per stove and can work continuously                        
4. The tube of fume extraction will recycle the gas flow which come from the inner stove during the carbonizing process for continue warming the stove, and it will save 70% energy consumption and recycle 95% smoking

Working steps of coconut shell carbonization furnace

1. Preparation
   
   Open the lid of carbonization furnace, lift out the inner tank, put raw material in, then put the inner tank back. Close the lid then seal it so that no oxygen could come inside.
   
   2. Heating
   
   After sealing process, use wood waste or gas to heat furnace from the bottom. After 10 minutes burning, the temperature reaches 90℃, turn to use slow fire to heat. This process will take 60-120 minutes to reduce water vapor from your materials.
   
   3. Carbonization
   
   Keep heating, after the temperature reaches 180-235 ℃, the raw material will produce flammable gas from the inner tank. Reuse the gas as fuel to heat the inner tank. The whole process will last about 8 hours. When the temperature reaches highest and no flammable gas is produced, the carbonization process is finished.
   
   4. Cooling
   
   Lift the inner tank out. Let it cool naturally. The longer cooling time is, the better quality of charcoal is. After about 10 hours, you can take charcoal out.

Technical Parameters

It can also be used the production line. 

f the raw material is rice husk, sawdust, or small logs, the production line is chipper--crusher--dryer--briquette machine--carbonization furnace. 

Hot Tags: coconut shell carbonization furnace, China, manufacturers, factory, cheap, low price, made in China, Carbonized Furnace, Continuous Carbonization Furnace, Wood Carbonization Stove, Hoist Carbonization Machine, Charcoal Carbonization Stove