1. Workers should be familiar with the working principle of the sawdust granulator and the structure and function of each part.
2. Workers wear tight overalls, keep their cuffs open, wear protective caps and dust masks, and must concentrate during operation.
3. Check whether there are sundries in the sawdust granulator and whether the screws are loose.
4. The motor of the sawdust granulator must be started with no load before it can work. It is strictly forbidden to invert the direction.
5. It is strictly forbidden to open the door of the machine at will during the production process, and do not reach into the granulation room with your hands.
6. The sawdust granulator must be grounded safely, disconnect the main power first when checking the machine.
7. When working, check and remove the metal on the magnetic separator at the entrance at any time, pay close attention to the working conditions, pay attention to the ammeter, and shut down in time if any abnormality is found.
8. Pay attention to adding high-temperature butter to the roller bearing in time, and the Dingliang granulator will add it every 3-5 times, and the butter cost will be greatly reduced.
9. When shutting down, run the mold with oil
10. When the sawdust granulator is not used for a long time, the material in the mold should be thrown out and rubbed with anti-rust