The difference between flat die and ring die feed pellet machine

1. Flat die pellet machine has lower output, and the hardness of the pressed feed is suitable for animal absorption. If you need a small output, it is more appropriate to buy a flat die. Ring die pellet machine has high output, such as the 560 type equipment with an output of about 1 ton per hour, and the pellets produced are of high hardness. The production cost of the equipment is higher than that of the flat die.
2. Ring die pellet machine is indeed a good hand in pressing feed, especially concentrated feed. It has large output and low power consumption, which is unmatched by flat die pellet machine.

3. Flat die has high pressure when working, and can pelletize raw materials with low viscosity. The output is lower than that of ring die. Flat die machine is used more in farms; ring die has higher output, but is highly dependent on the viscosity of raw materials, so it is more suitable for use in feed factories.
4. Pellet machine is divided into flat die and ring die. Ring die pellet machine has fast production capacity and stronger pellet hardness than flat die. In addition, there are many ring die models and strong selectivity. You can use anything to process pig feed, it mainly depends on your scale. If the scale is large, you must use ring molds, and if the scale is small, you can consider using flat molds.