Screw oil press standardized use of error operation need to be careful
Oil machine equipment we categorized under the ranks of machinery, machinery should pay attention to the standardized use, the correct operation is not only about our personal health, but also about the service life of the equipment. Good operation allows us to reduce the funds to replace the equipment, to obtain higher profits.
Most consumers buy back the screw oil press machine directly into use, so that the system out of the fat, whether it is the oil yield or quality are very low, the profit is very little. A lot of wrong operation is to reduce the life of the equipment, the source of accidents. Today we will introduce the screw oil press machine in the daily operation process is easy to commit the wrong operation of those that?
①. Power on the direct extraction.
Did not check whether the equipment line is aging; did not check whether there are hard foreign objects inside the oil extraction equipment; did not idle the equipment to check for abnormalities.
②. Equipment extraction process.
Long working hours, resulting in rapid aging of equipment components; failure to timely check whether the oil cup on the reduction gearbox lack of oil; equipment to reduce the amount of pressing, cake or oil out of the abnormal failure to timely check the equipment; wear parts, not replaced in a timely manner.
③. The end of pressing.
Failure to wipe the equipment dirt in time after the end of work, resulting in rust;
④. Long-term storage.
No attention was paid to one-time comprehensive maintenance before storage, dismantling and washing the press screws, press bars, and cake discharging ring to reapply oil;
⑤ Long-term use.
Failure to check the oil in the gearbox in time, the quality is deteriorated and should be replaced with new oil; failure to check and maintain the equipment on a regular basis.
