How to use the pellet feed machine and precautions
I. Feed pellet machine use and characteristics
1, the machine is mainly suitable for raising rabbits, fish, chickens, ducks, geese, pigeons, pigs, horses, cows, sheep and other livestock and poultry farming as well as industrial activated charcoal, plastics, organic fertilizer granulation.
2, corn does not need to be crushed can be added directly to the mixing and stirring to make particles, processed granular feed surface is smooth, moderate hardness, in the process of processing can be better to maintain a variety of nutrients within the raw materials.
3, particle molding effect is good, particle thickness according to the mold to adjust. Conventional: 2, 2.5, 3, 4, 5, 6, 8 mm, other apertures can be customized. When ordering, you can choose according to the different breeding animals and different animal growth period.
4, the extrusion process produces a high temperature of 70-80 degrees, which can kill the general disease-causing microorganisms and parasites, the surface layer is cooked, with a light flavor, and the pellet feed has a very low water content, which is easy to store.
The use of feed pellet machine
1, gearbox with hyperbolic heavy-duty gear oil before starting. Refueling to the oil mirror position can be.
2, the pellet machine will be placed smoothly, wiring is completed, check whether the motor steering is correct, according to the arrow indicating the direction of operation.
3, the initial use of the pellet machine, be sure to grind, because drilling holes in the hole more astringent, need to lubricate it, in accordance with the ratio of 5:2 configuration of grinding material, bran or sawdust mixed with waste engine oil mixing, a handful of put into the machine, adjust the pressure wheel screws, to be normal out of the material until the end, and then repeat the operation, grinding for half an hour can be put into normal production, grinding material do not discard, the end of the work is expected to Do not discard the grinding material, after the work is not expected to be used for a long time, the grinding material is pressed into the machine to avoid clogging of the holes in the next use.
4, in the process of feed processing, if the concentrate is more, it should be added about 5-8% water, if the grass is more, the molding effect is poor, the proportion of grass will be controlled at 50%.
5,After the processing is completed, relax the pressure wheel screws to make the rollers in a free state, and clean up the residual material after stopping the machine.
Cautions
1, the raw material must not have stones, iron, screws and other foreign objects.
2, granulation is strictly prohibited pressure wheel and grinding disk idling, should be uninterrupted feeding.
3,Granules appear crushed or pressed not solid, should be reduced to 50% or less of the crude fiber feed formula.
4,When there is no grain when granulating, you should check whether the mold is clogged, such as clogging. After casting open hole by hole, put the abrasive material into it, and then put the raw material into granulation again after repeated extrusion.
5, should always check the tightness of the screws, gearbox oil leakage, pressure wheel bearings, universal joints, spindle bearings, whether the lack of oil.
6, 125 type, 150 type, 160 type use lighting as power, the power line is not less than 4 square copper wire.
7,When the pellet machine is working, you can't put your hand into the feeding mouth, if necessary. Available sticks to help feed.
8, the machine works if the phenomenon of jamming, should immediately stop, check whether there is a foreign body, clean up before restarting the machine.
