Differences between 210 and 230 pellet mills
Feed pellet mill is mainly used for breeding, activated carbon granulation, organic fertilizer granulation, there are two-phase and three-phase electricity, diesel engine, diesel generator set and other models. It is indispensable for breeding cows and sheep, pigs and chickens, ducks and geese, rabbits, etc. It avoids animals picking food, saves feed cost, increases palatability and saves feed cost.
210 of the feed pellet mill grinding wheel diameter supporting 7.5 kilowatts of motor, there are two pressure wheels and three pressure wheels, two pressure wheels big, three pressure wheels small, some customers think the more wheels the better, in fact, in the output is not much difference, the output of 200-300 kilograms, 230 of the feed pellet mill supporting 11 kilowatts of motor, the same is also two pressure wheels and three pressure wheels, the output of 300-400 The output is 300-400 kilograms.
In the case of no electricity in the mountainous areas, the 210 is equipped with 12 horsepower or 15 horsepower, and the 230 is equipped with 18 horsepower or 22 horsepower.
When the new machine is used for the first time, the first thing to do is to add heavy-duty gear oil, power on, check whether the motor steering is correct, clockwise rotation is normal, and then make the grinding material, according to the ratio of 5:2 mixing evenly, boot, adjust the pressure wheel screws, over-tightening the pressure wheel and the grinding wheel wear faster, the gap is too large is not discharged, to be normal discharging can be, repeated pressing half an hour and then put into the feed pelletizing.