Why can't it reach the intended power? Is this a problem with the feed mill or an operational problem. Generally speaking, if a new machine comes home with no problems, then if the machine consumes more energy, it is usually an operational problem. If the raw material needs to be ultra-fine crushed, the efficiency tends to be smaller than for coarse material because the feed mill has a very fine sieve. However, in the crushing operation, the efficiency of micro-crushing can be improved if the difficult to crush and easy to crush raw materials are mixed for micro-crushing.
In the process of feed crushing, the loss of hammers and screens is relatively fast. After using for a period of time, the screen needs to be cleaned in time to prevent the holes from clogging. After using the hammer for a period of time, the hammer reverses. If the hammer and screen are worn or damaged seriously, they should be replaced in time. Use the fan and cloth bag for cleaning to keep the air-assisted system in a good negative pressure condition and yield. Clean the pulse bag later after the pulse fan stops. Ensuring that the bag is clean improves bag life and fan efficiency. Use the fan and bag for cleaning to keep the air assist system at a good negative pressure and yield. Clean the pulse bag later after the pulse fan stops. Ensuring that the bag is clean improves bag usage time and fan efficiency.
