How to maintain the wood chip machine

The materials that can be handled by wood chip machine equipment are waste wood waste, waste furniture, waste boards, wood processing leftover corner waste, branches, etc. These materials are waste materials that have been eliminated and no one uses them, and the wood chips are processed through wood chip machine equipment for recycling, and these wood chips are widely used, and these wood chips can be processed into biomass fuel for power plant burning through biomass pellet machine These wood chips can be processed through biomass pellet mill into biomass fuel for power plant combustion, or daytime fuel, with high utilization rate, easy storage and sanitary use; also can be used as edible fungus cultivation, paper making, etc., supplying a good material base for the profession.

The wood chip machine equipment itself is reasonably planned and can withstand the high strength impact load. In the process of use, will be due to pounding, impact and other elements to form parts wear and tear or deformation, which is inevitable, then how to avoid the frequency of replacement of these parts? Now give you an introduction to.
First, add material should adhere to the average, feed size according to the material hardness, hard material diameter shall not exceed three centimeters, metal hard pieces are strictly prohibited to enter the lower feed port.

Second, in the process of use, the motor load can not be overloaded, adhere to the normal operation.

Third, should often check the wear order of the blade, grinding plate, if found that the blade grinding plate wear serious should be replaced in a timely manner.

Fourth, when the wood chip machine equipment hammer blade angular wear, can change the angle of the head four times use available high chromium wear-resistant welding electrode repair reuse.

Wood chip machine needs to be regular maintenance and maintenance, if the problem really occurs, then you will really realize how important the daily maintenance and repair.