1. After the charcoal machine has been working for a long time, the motor pulley must be repaired, whether to add oil, whether to clean up the dirt, etc., so as to improve the service life of the machine.
2. Sometimes after the charcoal machine works for a long time, the belt will loosen, so the speed of the machine will be reduced a lot. This is the reason why the output can not be increased for a long time, so it is necessary to check the tightness of the belt. .
3. Check whether there is a large load in the operation of the motor, which will damage the motor for a long time and affect the working efficiency of the whole machine.
The characteristics and advantages of charcoal machine equipment are mainly equipped with a feeding system to ensure the stability of your drying effect and stabilize your production. The drying system technical drawing transfer sales model, so that you are not afraid to buy the product, eliminate your worries, and dry materials are good. Impurity isolation technology can improve the quality of your products and protect your molding equipment. The domestic screw dressing and grinding technology allows you to repair and grind a screw in a short period of time, and its continuous use time can reach more than 72 hours. Cost-effective mold technology makes your cost lower and products more stable. The fully quantified carbonization process of the carbonization furnace completely breaks the traditional carbonization process, and you can master the operation method of the entire carbonization process in a few days.