1. Regular cleaning and inspection:
Cleaning the surface of the equipment: Regularly clean the surface of the mechanical equipment to prevent dust and particles from accumulating and affecting the performance of the equipment.
Cleaning the chip removal holes and channels: Clean the chip removal holes and channels to prevent feed residues from clogging the equipment.
2. Lubrication and replacement of lubricating oil:
Check the lubrication points: Regularly check the lubrication points of the equipment to ensure that all parts are properly lubricated.
Change lubricating oil regularly: Change lubricating oil regularly according to the equipment manufacturer's recommendations to reduce wear.
|
Model |
Capacity |
Dimension |
Weight |
|
MK-125 |
80-100kg/h |
110*35*70 cm |
95 kg |
|
MK-150 |
120-150kg/h |
115*35*80cm |
100 kg |
|
MK-210 |
200-300kg/h |
115*45*95cm |
300 kg |
|
MK-260 |
500-600kg/h |
138*46*100cm |
350 kg |
|
MK-300 |
700-800kg/h |
130*53*105cm |
600 kg |
|
MK-360 |
900-1000kg/h |
160*67*150cm |
800 kg |
|
MK-400 |
1200-1500kg/h |
160*68*145cm |
1200 kg |
| 1.Used for making animal feed pellets
2.Used for making wood pellets as fuel 3.Raw material size need 3-5mm ; Humidity :10-12% |
|||
3. Electrical system inspection:
Check cables and wiring: Check the cables and wiring of the equipment regularly to ensure that the electrical system is working properly.
Check switches and control panels: Check all switches and control panels to ensure that they are normal, not loose, and function properly.
4. Transmission system maintenance:
Check belts and chains: Check the belts and chains of the transmission system regularly to ensure that they are tight and in good condition.
Check bearings and gears: Check bearings and gears regularly, clean and replace grease.
5. Mechanical component inspection:
Check tools and grinders: Check tools regularly to ensure that their wear is within an acceptable range.
Check vibrating components: For equipment with vibrating components, check the safety and stability of the vibrating components.