After preparing the required tools and materials, we need to calculate the model of the conveyor and the length of the conveying pipe according to the model of the pellet mill and the power of the motor. After confirming the above, you can proceed to the next step.
Installation of pellet machine
1. accurately confirm the installation position of the pellet mill and place the pellet mill on the reserved position.
2. Adjust the level and verticality of the pellet mill to ensure its stability.
3. Confirm the model and length of the conveyor and install it.
4. Connect the conveyor pipe with the pellet mill and make sure the connection is sealed.
5. Install the motor and connect it to the pelletizer.
6. Adjust the speed and direction of the motor to ensure that it matches the pelletizer.
| Model | Capacity | Power | Dimension | Weight |
| 125 | 80-100kg/h | 3kw | 110*35*70 cm | 95 kg |
| 150 | 120-150kg/h | 4kw | 115*35*80cm | 100 kg |
| 210 | 200-300kg/h | 7.5kw | 115*45*95cm | 300 kg |
| 260 | 500-600kg/h | 15kw | 138*46*100cm | 350 kg |
| 300 | 700-800kg/h | 22kw | 130*53*105cm | 600 kg |
| 360 | 900-1000kg/h | 22kw | 160*67*150cm | 800 kg |
| 400 | 1200-1500kg/h | 30kw | 160*68*145cm | 1200 kg |
iii. using the pellet mill
1. Before using the pellet mill, it is necessary to carry out a trial run to confirm its normal operation.
2. Put the raw materials to be processed into the feeding port of the pellet machine and adjust the feeding speed and quality.
3. according to the model of the pellet machine, determine the appropriate discharge port, and regularly clean the discharge port and discharge pipe to avoid clogging.
4. After use, you need to turn off the power of the pellet mill for maintenance.
Fourth, maintenance
Maintenance of the pellet machine is very important to extend its service life. Specifically as follows:
1. regularly check and clean the feeding port, discharge port and conveying pipeline and other parts.
2. Keep the motor and transmission parts in good condition and add lubricant regularly.
3. regularly check and replace the wearing parts, such as blades, grate plate, etc.
4. carry out regular overhaul and maintenance of the pellet machine to ensure its normal operation.
The above is the detailed introduction of the installation and use tutorial of the pellet machine. If you use the pellet machine for the first time, you can follow the steps in this article to ensure its normal operation. Especially at the end of the use, make sure to carry out maintenance, so that the pellet machine to extend the life.