During the operation of the feed extruder, the starch in the feed can be better digested and absorbed, the feed tastes better, and the feed content can be increased. It is an efficient feed processing method.
The extruder is suitable for a variety of feed types, such as corn, bean cake, fish meal, protein powder, etc., especially corn, bean cake and other starch-rich feed types. After extrusion, it tastes better and has higher energy, which is more conducive to digestion and absorption of livestock and poultry.
1. Preparation: Prepare the extruder, feed raw materials, extruder sprayer and other equipment, and clean them.
2. Proportional configuration: According to different types of feed and different formula ratios, the feed raw materials and auxiliary materials to be added are configured according to the standard and loaded into the extruder.
| Model | 40 | 60 | 70 | 80 |
| Power | 5.5KW | 15KW | 18.5KW | 22KW |
| Yield | 120-150 | 180-220 | 240-300 | 400-500 |
| Weight | 350KG | 450KG | 500KG | 580KG |
| Size(mm) | 1500*1100*1100 | 1600*1300*1250 | 1600*1300*1250 | 1800*1400*1350 |
3. Processing operation: put the prepared feed raw materials into the extruder, start the extruder, and gradually adjust the temperature, pressure, speed and other parameters of the extruder.
4. Spraying and polishing: during the extrusion process, water or oil needs to be added to reduce the temperature and increase the sliding property to avoid adhesion between feed particles. The feed particles are made smooth and uniform by spraying and polishing.
5. Discharge of feed: when the feed particles are expanded to a certain extent and meet the requirements, stop processing and discharge the feed particles from the extruder.
Precautions
1. Choose the right feed: when using the extruder to process feed, it is necessary to select the right processing method and parameters according to different feed types and forms to obtain the best extrusion effect.
2. Control processing parameters: when the extruder processes feed, it is necessary to pay attention to controlling parameters such as temperature, pressure, and speed to avoid exceeding the limit that the feed material can bear, so as not to affect the quality of the feed.