The rdf briquetting machine adopts electromechanical and hydraulic integration technology, with mature structure and stable operation; the mold is single-piece independent, easy to replace, convenient and fast; it has automatic lubrication and electro-hydraulic lubrication device for convenient maintenance; it has an automatic flip function, The car chamber can be reversed by itself. The working principle and process flow of the RDF fuel briquetting machine: The briquetting machine consists of a machine base, a guard, a feed port, a pressure wheel, a flat die, a discharge port and other parts. Its working principle is: the material to be pressed should be crushed first, its length is preferably 30-60mm, and the moisture content is within the range of 15%-25%. The material is sent to the inlet of the briquetting machine through the feeding conveyor. The material is evenly dispersed into the working area between the pressing wheel and the flat die. The main shaft rotates to drive the pressing wheel to rotate. The material is forced out of the flat die into blocks and falls from the discharge port.
|
Model |
Power |
Capacity |
Briquette size |
Hole quantity |
|
MK-550 |
55kw |
1t/h-1.5t/h |
32*32mm |
36pcs |
|
MK-750 |
75kw |
1.5t/h-2t/h |
32*32mm |
54pcs |
|
MK-900 |
90kw |
2t/h-2.5t/h |
32*32mm |
72pcs |
|
MK-1600 |
160kw |
2.5t/h-3t/h |
32*32mm |
120pcs |
The RDF fuel briquetting machine mainly crushes and dries corn cobs, straw, sawdust, old clothes, peanut shells, straw, cattle and sheep dung from farms, and then enters the RDF solid waste briquetting machine to crush them into small pieces. Combustion pellets are smokeless, environmentally friendly, and have high calorific value. They are a good material that can replace coal. They are used in industrial and civil boilers, urban heating, barbecues, drying towers, and heaters. They have wide sales and promising market development prospects. Independent lubrication, 24-hour working and fully automatic lubrication; the mold is stationary, the pressure wheel rotates, the material is centrifuged and evenly distributed around the periphery; the main drive of the vertical ring die pellet machine adopts high-precision gear drive, and the output is about 20% higher than that of belt drive.