Branch shredder cleaning method
1. The cleaning of the branch shredder products is mainly to check and clean the branch shredder products after the crushing work is completed every day, mainly for the material remaining on the shredder knife shaft or the screen.
2. For cleaning the interior of the branch shredder, you can use a blower to blow forcefully, and you can use tools to clean it manually, but do not use a lot of water to rinse, because the branch shredder has just stopped rotating, and it has a certain amount of heat. Rinsing for a long time will cause rust inside the wood chipper and reduce the service life of the wood chipper.
3. When cleaning the branch crusher, it is necessary to control the material. Based on so many years of experience, we, Lixin, have found that the users of the tree shredder who often experience the phenomenon of jamming, the site material purity is not high and the site is chaotic.
4. In the process of feeding and crushing, it is possible that some special materials will be mixed in the material, such as metal, iron wire, stone, etc. These materials are not only easy to get stuck on the inner wall of the wood chipper, but also cause damage to the blades of the wood chipper after being crushed for a long time. Therefore, it is necessary to pay attention to the purity of the material, which is also the key to convenient cleaning of the products of the wood chipper.
5. Letting the shredder run idly is also a good way to clean the shredder product. After the crushing task is completed on the same day, the shredder can be idling for a few times, which is helpful to clean the inner wall of the shredder, because some materials may be left in the shredder. In the pipe of the machine, or on the screen, let the wood chipper run idly, which can make a simple cleaning effect on the screen and the pipe of the wood chipper.